anchoring technique

Second Great Technique for Dinghy Anchoring

Tuggy Products' Anchor Buddy Elastic Dinghy Anchoring Line

Greenfield Products' Anchor Buddy Elastic Dinghy Anchoring Line

Our recent piece by Jeff Siegel of ActiveCaptain about a novel dinghy anchoring technique stimulated quite a bit of discussion from readers and we even heard about another, possibly even better, technique from John Marshall, owner of the Nordhavn 55 Serendipity. Marshall discovered a particular product that makes the process of anchoring the dinghy off the beach but keeping it within reach even easier.  Best to read this in his own words:

“Securing a dink on a shore with big tidal exchanges and keeping it both floating and within reach is one of life’s challenges. My dink weighs 900 pounds, so if it grounds, I’ve gotta wait for the next high tide. Not fun if its raining and the next high tide is in the middle of the night and I didn’t put my rain gear in the dink. (Don’t ask!) All it took was one time of that nonsense and I bought an Anchor Buddy, and I started packing a dink bag with rain gear, space blankets and tube tents that would let me spend the night on shore in bad weather if needed.

There is a neater way to do this that’s very popular in the Pacific Northwest…using an Anchor Buddy.

Basically, is a large woven line with surgical tubing inside it that curls up small when not in use, but stretches out about 50′. It’s also very strong. You attach whatever size anchor is appropriate, drop it about 50′ from shore, motor in to shore stretching out the Anchor Buddy until you ground. Then, when you get off, you let it pull the boat back out to the anchor until you need it.

We use a 100′ of thin line on the bow as the retrieval line. Even with our big tides up here, it generally keeps the dink floating.

The two key advantages over the approach you cited is that you can use a bigger anchor, even one that could hold in a gale, and you are setting and retrieving it directly over the side of the dink where its easy to work. The second advantage is that the strong elastic actively pulls the boat back to the anchor, even in a stiff wind. It also cushions the shock on the anchor so its harder to pull out if you do get caught in a gale.”

Marshall uses an eight-pound Danforth-type anchor, which is pretty stout for a dink, but according to Marshall it fits under his seat. “I don’t like the folding grapple-type anchors, as they have failed me a few times. Good in rocks, but lousy in mud or sand. So far, the Danforth is 100% on any kind of bottom,” he says. Also, the surgical tying is inside a wide-weave tube of poly line, basically a hollow line, says Marshall. “So when it’s fully stretched out, it’s very strong. The elastic isn’t what provides the holding power in a big blow, although I think it would take a gale to stretch it out, even with a heavy dink.”

Here’s a link to the product page at the original company that developed the Tuggy Product line (somewhat loud narration on this page), and here is a link to the current manufacturer Greenfield Products, which also shows a lighter weight version of the Anchor Buddy.  The Anchor Buddy and related products are sold through many marine suppliers and chandleries, including at West Marine which shows it on this webpage.  Many thanks, as usual, to reader John Marshall for his generous contribution. And thanks to Wes Pence at Greenfield Products for the photo.

Any other suggestions out there?

Copyright © 2010 by OceanLines LLC.  All rights reserved.

Posted by Tom in Boats, Cruising Under Power, Cruising Under Sail, Gear & Apparel, Industry News, Passagemaking News, Powerboats, Sailboats, Sailing Gear & Apparel, seamanship, Technology

Great Technique for Dinghy Anchoring at the Beach

By Jeffrey Siegel (ActiveCaptain); Videography by Karen Siegel

Here’s a great technique for anchoring the dinghy off the beach. Our dinghy weighs about 800 pounds. She’s a rigid inflatable with a 40 HP engine. It’s our family car when we’re cruising and we put a lot of demands on her.

So I was telling Larry how much of a hassle it is when bringing the dogs to the beach. Beaching the boat ends up pushing the whole boat sideways on the beach with oncoming waves and can become very difficult to re-float it when it’s time to leave. Instead, we keep going back every 5 minutes to push the boat back into the water.

Larry had a solution. He always does. And this one is a doozy.

Editor’s Note — The Siegels are currently cruising the warm waters of the southeastern U.S. and Bahamas in aCappella, their DeFever 53RPH trawler, along with canine kids Dylan and Dyna. Jeff wrote this piece on a new dinghy anchoring technique for their travel blog, Taking Paws, and I asked if we could reprint it here.  You’ll want to practice this in relatively calm waters the first time you do it and you should have a pretty good idea of the bottom slope off the beach. With that info in hand, this looks like a terrific solution. Tell us what you think in the comments.

“You don’t know how to use the trip line on the anchor to remotely anchor the dinghy?” Larry asks. Well, no, I don’t. I’ve never seen anyone ever do it. With that Larry gives me the specs for what I need an explains exactly how to do LRA – Larry’s Remote Anchoring.

First, the equipment and deployment.

I use a grappling hook type of dinghy anchor. LRA is real anchoring so I created a special rode of 5 feet of chain with 8 feet of 3/8″ line. I attached a clip to the end of it so it could be attached to the bow eye of the dinghy close to the water.

The critical piece of equipment is 100 feet of 1/4 inch nylon line on a spool. That gets attached to the trip line eye at the bottom of the anchor.

With that all ready, this video shows the equipment and deployment at Sombrero Key.  We land in about 2 feet of water and push the boat out to anchor in 4 feet of water. Turn your sound up – it’s hard to hear – lots of dogs hanging around the “studio”.

The magic is in putting all of the equipment on the bow easily popped into the water by a slight tug of the trip line. The trip line is the retrieval device and an emergency line in case the anchor fails. It isn’t good enough to hold the dinghy in a gale, but for going to the beach, it’s plenty good enough.

Retrieving the anchor is just as easy.

It’s all pretty easy to do. I strongly suggest using chain on the anchor if you’re going to use this technique. Total cost for this was about $25 plus the anchor which we already had.

Now Larry, how about a trick for rinsing and drying off wet dogs before they get back onto the boat?

Story text and video Copyright © 2010 by Jeffrey Siegel and Karen Siegel

Copyright © 2010 by OceanLines LLC. All rights reserved.

Posted by Tom in Boats, Cruising Under Power, Cruising Under Sail, Destinations, Gear & Apparel, Passagemaking News, People, Powerboats, Sailboats, Sailing Gear & Apparel, seamanship